Siemens Simatic box pc 627b - Installing; Removing the Processor

Maintenance and service
11.1 Removing and installing hardware components
SIMATIC Box PC 627
11-14 Operating Instructions, Release 05/2006, A5E00362052-03
11.1.8 Installing / removing the processor
Caution
The processor replacement may only be carried out by authorized qualified personnel.
Preparation
1. Unplug the device from mains.
2. Open the device.
Removing the processor
How to remove the processor
1 Remove the 4 screws holding the
processor heat sink and remove
the heat sink