Maintenance and service
11.1 Removing and installing hardware components
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
11-5
11.1.3 Removing/Installing the Power Supply
Warning
Only qualified personnel is authorized to exchange the power supply module.
Preparations
1. Disconnect the device from mains and unplug all cables.
2. Open the device.
Removing the power supply module
How to remove the power supply module
1 Remove the hard disk,
DVD-ROM/CD-RW drive bay
module.
2 Unscrew 5 screws (1) and remove
the power supply module cover.
To Next Page
Loading...
