Siemens Simatic box pc 627b - Partitioning the Hard Disk; Setting up Partitions under Windows XP Professional; Windows 2000 MUI; Setting up the Partitions under Windows XP Embedded

Maintenance and service
11.3 Partitioning the hard disk
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
11-25
11.3 11.3 Partitioning the hard disk
11.3.1 Setting up the partitions under Windows XP Embedded
After you have installed a new hard disk, or if partitions are faulty, or when you wish to
change the partitioning on your hard disk, you need to create or reconfigure partitions on the
hard disk
Partitioning the Compact Flash card
The factory state of the Compact Flash card includes the following partitions:
Size of the card Partition Name
512 Mbytes 1 Gbytes
File system
1. Partition system 455 Mbytes 867 Mbytes NTFS (compressed)
2. Partition DATA Rest * Rest * NTFS (compressed)
* Due to partitioning/formatting, the actual Compact Flash capacity does not correspond to
the memory size specified on the Compact Flash.
In order to revert to the original factory state partitions, we recommend using the software
tool SIMATIC PC/PG Image Creator. Detailed information about using this tool is available in
the manufacturer documentation.
11.3.2 Setting up partitions under Windows XP Professional / Windows 2000 MUI
After you have installed a new hard disk, or if partitions are faulty, or when you wish to
change the partitioning on your hard disk, you need to create or reconfigure partitions on the
hard disk
Partitioning the hard disk
The factory state of the hard disk with Windows XP Professional includes the following
partitions:
Partition Name Size File system
1. Partition system 15 GB NTFS (not compressed)
2. Partition DATA Rest NTFS (not compressed)
In order to revert to the original factory state partitions, we recommend using the software
tool SIMATIC PC/PG Image Creator. Detailed information about using this tool is available in
the manufacturer documentation.