Expansions and configuration
10.4 Installing disk drives
SIMATIC Box PC 627
10-10 Operating Instructions, Release 05/2006, A5E00362052-03
10.4.2 Installing/removing a drive bay module
Preparations
Disconnect the device from mains and unplug all cables.
Removing a drive bay for hard disks / DVD/CD-RW
Steps for removing the drive bay
1 Unscrew 4 screws (1).
2 Lift out the drive bay module for
hard disks and DVD / CD-RW
drives and set it down on the
device.
To Next Page
Loading...
