Siemens Simatic box pc 627b - Installing and Removing DVD-ROM;CD-RW Drives

Expansions and configuration
10.4 Installing disk drives
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
10-11
10.4.3 Installing and removing DVD-ROM/CD-RW drives
Removing a DVD-ROM/CD-RW
How to remove the DVD-ROM/CD-RW drive
1 Remove the drive bay module.
2 Remove the 2 screws (1) on the
DVD-ROM/CD-RW drive bay
3 Remove the 3 fastening screws (2) of
the drive
4 Remove the 2 screws (3) of the
adapter board
5 Pull out the adapter board
6 Lift out the drive
Required tools
You need a Torx 6 screwdriver to remove the the DVD-ROM/CD-RW drive.