Siemens SIMATIC CPU 410

Properties and technical specifications of CPU 410 SMART
17.2 Technical specifications of the CPU 410 SMART; (6ES7 410-5HN08-0AB0)
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC
285
17.2
Technical specifications of the CPU 410 SMART; (6ES7 410-
5HN08-0AB0)
Article number
6ES7410-5HN08-0AB0
General information
Product type designation
CPU 410 SMART Process Automation
Hardware product version
2
Firmware version
V8.2
Design of PLC basic unit With Conformal Coating (ISA-S71.04 severity
level G1; G2; G3) and operating temperature to
70 °C
Product function
• SysLog
Yes; via TCP; up to 4 receivers can be parame-
terized; buffer capacity max. 3 200 entries
• Field interface security
Yes
Engineering with
• Programming package
SIMATIC PCS 7 V9.0 or higher
CiR – Configuration in RUN
CiR synchronization time, basic load
60 ms
CiR synchronization time, time per I/O byte
0 µs
Input current
from backplane bus 5 V DC, typ.
2 A
from backplane bus 5 V DC, max.
2.4 A
from backplane bus 24 V DC, max.
150 mA; DP interface
from interface 5 V DC, max.
90 mA; At the DP interface
Power loss
Power loss, typ.
10 W
Memory
PCS 7 process objects 800; only System Expansion Card PO800 can be
used
Work memory
• integrated
8 Mbyte
• integrated (for program)
4 Mbyte
• integrated (for data)
4 Mbyte
• expandable
No
Load memory
• integrated RAM, max.
48 Mbyte
• expandable RAM
No
Backup
• present
Yes
• with battery
Yes; all data