Siemens SIMATIC CPU 410 User Manual

Properties and technical specifications of CPU 410 SMART
17.2 Technical specifications of the CPU 410 SMART; (6ES7 410-5HN08-0AB0)
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC
289
Article number
6ES7410-5HN08-0AB0
– Global data communication
No
– S7 basic communication
No
– S7 communication
Yes
– S7 communication, as client
Yes
– S7 communication, as server
Yes
– Equidistance
No
– Isochronous mode
No
– SYNC/FREEZE
No
– Activation/deactivation of DP slaves
Yes; Single mode only
– Direct data exchange (slave-to-slave
communication)
No
– DPV1
Yes
Address area
– Inputs, max.
1 536 byte; Up to 1 500 IOs (channels)
– Outputs, max.
1 536 byte; Up to 1 500 IOs (channels)
User data per DP slave
– User data per DP slave, max.
244 byte
– Inputs, max.
244 byte
– Outputs, max.
244 byte
– Slots, max.
244
– per slot, max.
128 byte
2. Interface
Interface type PROFINET
Physics
Ethernet RJ45
Isolated
Yes
automatic detection of transmission rate
Yes; Autosensing
Autonegotiation
Yes
Autocrossing
Yes
System redundancy
Yes
Redundant subnetworks
Yes
Change of IP address at runtime, supported
No
Number of connection resources
120
Interface types
• Number of ports
2
• integrated switch
Yes
Media redundancy
• supported
Yes
• Switchover time on line break, typ.
< 200 ms

Siemens SIMATIC CPU 410 Specifications

General

Brand	Siemens
Model	SIMATIC CPU 410
Category	Control Unit
Language	English