Siemens SIMATIC ET 200AL - Page 118

Index
Distributed I/O system
116 System Manual, 02/2018, A5E31861578-AF
I
I/O modules, 15
Identification data, 74
Identification label, 15, 45
Mounting, 45
Removing, 45
Infeed
grounded, 30
non-grounded, 30
Installation position, 23
Insulation, 92
Insulation monitoring, 32
Interface module
PROFIBUS DP, 15
PROFINET IO, 15
Wiring, 40
Interface modules, 15
L
Line voltage, 29
M
M12 connectors, 42
M8 connectors, 41
Maintenance, 78
Maintenance data, 74
Marking
Factory-marked, 44
Interfaces, 44
Optional, 45
Maximum configuration
Electrical, 17
Mechanical, 16
Mechanical ambient conditions, 91
Minimum clearances, 23
Mounting, 24
I/O module, 26
Interface module, 25
O
Option handling, (See configuration control)
Overall configuration, 31
P
PELV, 30
Pin assignment, 42, 44
Power supply
Connector, 15
Power cable, 15
PROFIenergy, 70
PROFINET IO, 67
Protection class, 92
Protective measures, 32
Pulse-shaped disturbance variables, 88
R
Radio interference, 87
Rated voltage, 92
Reference potential
grounded, 30
non-grounded, 30
S
Safe electrical isolation, 30
Safety relay, 94
Screws, 24
SELV, 30
Setup, 13
Shock, 91
SIMATIC ET 200AL, 12
Sinusoidal disturbance variables, 89
Slot number, 79
Sockets, 43
Spare parts, 97
Standards, 85
System conditions, 28
System configuration
Grounded reference potential, 30
Protective measures, 32
Ungrounded reference potential, 30
T
Technical specifications
Standards and authorizations, 85
Test voltage, 92
TN-S grid, 30
Tool, 24
Transport and storage conditions, 90
TÜV certificate, 95
U
Ungrounded infeed, 30