Siemens simatic ET 200MP - Accessories;Spare Parts

ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
113
Accessories/spare parts
B
Accessories for the ET 200MP distributed I/O system
Table B- 1 ET 200MP accessories
Designation Order number
Mounting rail
• Mounting rail, 160 mm (with drill holes)
6ES7590-1AB60-0AA0
• Mounting rail, 482 mm (with drill holes)
6ES7590-1AE80-0AA0
• Mounting rail, 530 mm (with drill holes)
6ES7590-1AF30-0AA0
• Mounting rail, 830 mm (with drill holes)
6ES7590-1AJ30-0AA0
• Mounting rail, 2000 mm (without drill holes) for cutting to length
6ES7590-1BC00-0AA0
PE connection element for 2000 mm mounting rail (spare part), 20 unit 6ES7590-5AA00-0AA0
Front connector (incl. four potential bridges, cable tie, and a single labeling strip)
• Screw-type terminals (40-pin)
6ES7592-1AM00-0XB0
4-pole connector plug for supply voltage on the interface module (spare
part), 10 unit
6ES7193-4JB00-0AA0
DIN A4 labeling sheet (10 x labeling strip for I/O modules)
• Pre-perforated, AI gray
6ES7592-2AX00-0AA0
U connector (spare part), 5 unit 6ES7590-0AA00-0AA0
I/O shielding set (power supply element, shielding bracket, and shield
clamp), 5 unit
6ES7590-5CA00-0AA0
Shield terminal element 6ES7590-5BA00-0AA0
Power cable connector with coding element for power supply module
(spare part), 10 unit
6ES7590-8AA00-0AA0
Potential bridge for front connector (spare part), 20 unit 6ES7592-3AA00-0AA0
Universal front cover for I/O modules (spare part), 5 unit 6ES7528-0AA00-7AA0
Consists of:
• 5 x front cover
• 5 x front labeling strip (per module - MLFB)
• 5 x wiring plan (per module - MLFB)
Universal front cover for IM 155-5 PN ST (spare part), 5 unit 6ES7528-0AA70-7AA0
Consists of:
• 5 x front cover
Industrial Ethernet FastConnect RJ45 plug 180, 1 unit 6GK1901-1BB10-2AA0
Industrial Ethernet FastConnect RJ45 plug 180, 10 unit 6GK1901-1BB10-2AB0