ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
3
Preface
Purpose of the documentation
This documentation provides important information on configuring, installing, wiring and
commissioning the ET 200MP distributed I/O system.
Basic knowledge required
A basic knowledge of automation technology is required to understand the documentation.
Scope of validity of the documentation
This documentation applies to the ET 200MP distributed I/O system.
Conventions
Please also observe notes marked as follows:
Note
A note contains important information on the product, on the handling of the product and on
the section of the documentation to which particular attention should be paid.
Recycling and disposal
The products can be recycled due to their low pollutant content. For environmentally
compliant recycling and disposal of your electronic waste, please contact a company
certified for the disposal of electronic waste.
Additional support
● Information about the technical support available can be found in the appendix to this
documentation (Page 115).
● The range of t
echnical documentation for the individual SIMATIC products and
automation systems can be found on the Internet (http://www.siemens.com/simatic-tech-
doku-portal).
● The online catalog and the online ordering system are available on the Internet
(http://mall.automation.siemens.com
).
To Next Page
Loading...
Need help?
General
