Siemens simatic ET 200MP - Optional Marking

Wiring
6.9 Marking the I/O modules
ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
75
6.9.2 Optional marking
Introduction
On the I/O modules there is free space on the front cover, that permits an additional labeling
or marking on the part of the customer.
Optional marking
The marking label (approx. 12 x 30 mm) can be prepared and applied as needed by the
customer.

① Free space e.g. for marking production equipment
Figure 6-10 Optional marking