Siemens simatic ET 200MP - Protection by Locking the Interface Module

Commissioning
8.4 Protection by locking the interface module
ET 200MP Distributed I/O System
84 System Manual, 01/2013, A5E03723484-01
8.4 Protection by locking the interface module
Protect your interface module from unauthorized access using a sufficiently secured front
cover.
You have e.g. the following options:
● affix a seal
● secure the front cover with a lock or cable tie
Figure 8-2 Locking strap on the interface module
Note
You must leave sufficient space on the left.