Siemens simatic ET 200MP - Codes for Measurement Types; Codes for Measuring Ranges

Installation
5.5 Installing I/O modules
ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
49
Uninstalling I/O modules
The I/O module is wired:
1. Turn off all fed supply voltages.
2. Open the front cover.
3. Pull the front connector out of the I/O module using the unlocking strap.
4. Loosen the fixing screw of the I/O module.
5. Pivot the I/O module out of the mounting rail.