To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC HMI KTP400 Basic and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Resolution | 480 x 272 pixels |
| Touchscreen | Yes |
| Backlighting | LED |
| Color Depth | 16-bit |
| Power Supply | 24 V DC |
| Mounting | Panel mounting |
| Operating Temperature | 0 to 50 °C |
| Display Size | 4.3 inches |
| Display Colors | 65K colors |
| Power Consumption | Approx. 3.6 W |
| Protection Rating | IP65 (front) |
| Storage Temperature | -20 to 70 °C |
| Relative Humidity | 10% to 90% (non-condensing) |
| Interfaces | PROFINET |
Provides essential safety guidelines for operating and installing the HMI device.
Covers important usage considerations, including environmental and application limits.
Details the process of physically installing the HMI device into a panel.
Explains the procedures for connecting power, communication, and other interfaces.
Describes how to access the device's configuration menu via the Start Center.
Lists and briefly describes all available configuration functions.
Guides on how to assign IP addresses and device names to connected controllers.
Describes how to modify parameters for existing controller communication connections.
Explains how to set or change passwords for unauthorized access protection.
Explains the phases of project configuration and commissioning.
Describes the different operational states of the HMI device (Offline, Online, Transfer).
Covers the process of transferring projects from a PC to the HMI device.
Details methods for testing the project offline and online.
Specifies the rated voltage and tolerance range for the HMI device.
Details the types and specifications of communication interfaces.
