Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
97
Certificates and approvals
Approvals
Note
The following overview shows possible approvals.
The HMI device itself is approved as shown on the rear panel labels.
The HMI device fulfills requirements and criteria according to IEC 61131-2, Programmable
Logic Controllers, Part 2: Operating resource requirements and tests.
The HMI device meets the general and safety-related requirements of the following EU
directives and conforms to the harmonized European standards (EN) for programmable logic
controllers published in the official gazettes of the European Union:
● 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
● 2011/65/EU "Directive of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment" (RoHS Directive)
EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS SYS
P.O. Box 1963
D-92209 Amberg, Germany
The Declaration of Conformity and other certificates are also available at the following
Internet address:
Certificates for Basic Panels 2nd Generation
(https://support.industry.siemens.com/cs/ww/en/ps/14738/cert
)
To Next Page
Loading...
Need help?
General
