Siemens SIMATIC HMI KTP400 Basic

Configuring the device
5.13 Changing the password settings
Basic Panels 2nd Generation
60 Operating Instructions, 10/2016, A5E33293231-AB
5.13
Changing the password settings
Password protection prevents unauthorized access to the Start Center.
Note
The password must not contain spaces or the following special characters:
* ? . % / \ ' ".
If the password is no longer available for the Start Center, you first have to update the
operati
ng system before you can make any changes in the Start Center. All data on the HMI
device will be overwritten when you update the operating system.
Activating password protection
1.
Touch the "System Control/Info" icon.
2.
Press the "Access Protection" button.
3.
Enter a password in the "Password"
text box. Touch the text box. The
alphanumerical screen keyboard is
displayed.
4.
Confirm the password in the
"Confirm Password" text box.