Commissioning the device
4.3 Parameterizing the Comfort Panel
Comfort Panels
Operating Instructions, 08/2018, A5E36770603-AC
107
4.3.6.11 Setting volume and sound
Volume and acoustic signal of the 4" devices
You can activate an acoustic feedback for keyboard and touch screen operations. An
acoustic signal is emitted with each touch or activation of a key.
Requirement
The Control Panel is open.
Note
If you disable each of the settings under "Enable
clicks and taps for", no acoustic signals will
be output for incorrect operator inputs.
Procedure
Proceed as follows:
1. Open the "Sound" dialog using the "Sound" icon.
2. To output acoustic signals for operator actions, select the desired options under "Enable
clicks and taps for":
– "Key clicks": Feedback of key operation
– "Screen taps": Feedback of touch operation
3. Use "Loud" and "Soft" to select between loud and quiet operator feedback.
4. Confirm your entries with "OK".
The properties of acoustic signals are set.
To Next Page
Loading...
