Siemens SIMATIC Ident - Page 89

Setting parameters for blocks
3.5 Programming the Ident profile
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
89
Table 3- 71 GET-BLACKLIST (RF61xR/RF68xR only)
Parameter
Value / description
CMD
0x6C
OFFSETBUFFER Offset in the "RXREF" receive buffer
RXREF
Read black list IDs
Table 3- 72 READ-CONFIG
Parameter
Value / description
CMD 0x61
OFFSETBUFFER
Offset in the "RXREF" receive buffer
RXREF
Read reset parameters
Table 3- 73 WRITE-CONFIG
Parameter
Value / description
CMD
0x78
OFFSETBUFFER
Offset in the "TXREF" send buffer
LEN_DATA
Length of the parameter data
CONFIG
• 0x01 ≙ communication reset, no configuration data
• 0x02 ≙ no communication reset, configuration data to be sent
• 0x03 ≙ communication reset, configuration data to be sent
• 0x80 ≙ no communication reset, individual parameters
TXREF
Configuration data to be sent