Siemens SIMATIC S5 User Manual

Error Diagnostics S5-115F Manual
ISTACK display on the PG 635/675/685/695 and 750 with COM 115F
The following tables show the ISTACK as it is displayed on CRT-based programmers. Set bits are
marked by ”X” (here, for example, FITEKO-OK, STOANZ., etc.).
Some bit identifiers are different when using LAD, CSF and STL .
FIDE_M_T
FINT_GEW
FITEKO_OK
X
SD 7
(EA0E)
SD 6
(EA0C)
SD 5
(EA0A)
FIQV
CONTROL BITS
FISIN_PR FIALA_TE BSTSCH ADRBAU TIMR_AKT FIFEDB_S FISTPS
FIURLOE FIWINT
FIEMPF ABFS_AKT
X
FIWEBI_2
SCHTAE
STOANZ
X
NEUSTA
FIR_BUS
BATPUF
FISEND
BARB BARBEND
FIKSTOP
STOZUS
FIF_BETR FIBS_AKT FITL_AG FIEA_PER NB FIALA_SP
ASPNRA
X
FIDE_TE FIOBT_RQKOPFNI ASPNEEP FIOBT_FEASPNEP
ALARMREQ
SYNFEH NB NB NBNINEU NB URLADKEINAS
Figure 5.1. Control Bit Display (SD 5, 6, 7)
UAW
SUF NNN
1
0000 DB ADR:
DB NO.:
0000
000
DEPTH:
BRACKETS:
RESULT
DISPLAY:
CAUSE OF
FAULT:
FFF1 00FF
000 000 000 000 000
CARRY
STOPS
X
STS STUEB
ANZ1
(CC1)
OVFL STATUS VKE
(RLO)
ODER ERAB
FIF_
FEHLER
KE1 KE2 KE3 KE4 KE5 KE6
ACCUM2:
4080
EAFF
ACCUM1:
OP REG:
BLK STP:
SAZ:
NO.:
REL SAZ:
INTERRUPT STACK
TRAF
ANZ0
(CC0)
NAU QVZ ZYK PEU BAU ASPFASYSFE
Figure 5-2. Interrupt Stack Display
5-2 EWA 4NEB 811 6149-02

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)