Siemens SIMATIC TI555 - Series 505 Modules

Module Power Consumption
B-4
TI545/TI555 System Manual
Series 505 Modules (continued)
T able B-1 Series 505 Module Power Requir ements (continued)
Model
N
umber
Description
Special
Function
Module
Immediate
I/
Maximum DC Power
Consumption (Watts)
Model
N
umber
Description
Function
Module
I/
O
+5 V –5 V
PPX:505–6851A Remote Base Controller (RBC) 5.0 0.200
PPX:505–6860 RF to RS-485 Converter
4 4
PPX:505–7002 High Speed Counter & Encoder
n
3
2.0 –
PPX:505–7003 High Speed Counter Encoder
n
3
2.0 –
PPX:505–7012 8 In/4 Out Analog
n
2
3.0 0.030
PPX:505–7016 Bipolar 8 In/4 Out Analog
n
3.0 0.030
PPX:505–7028 Thermocouple Input
n
2.2 0.01
PPX:505–7038 RTD Input
n
2.2 0
PPX:505–7101 BASIC Module
n
6.0 0.125
PPX:505–7190 7MT Channel Controller 4.0 –
PPX:505–7201 FIM (Field Inteface Module) 2.5 –
PPX:505–7339 NIM (Network Interface Module)
n
8.0 –
PPX:505–7340 Dual Media NIM
n
8.0 –
PPX:505–7354 Peerlink
n
8.0 –
PPX:505–ATM
–0220
–0440, –4120
386/ATM Coprocessor Module
(IBM AT-Compatible Coprocessor)
n
11.0 0.2
PPX:545–1102
PPX:555–1101
PPX:555–1102
Programmable Logic Controller 4.0 0.200
Notes:
1
Modules that are affected by date code restrictions. See Appendix C.
2
Only inputs should be used for immediate I/O when using Release 1.1.x of TI555. No restriction with Release 3.0.
3
Supported by TI555 Release 3.0 or TI545–1 102 Release 3.0.
4
Refer to TI555 Release 3.0 Notes.
For any module not listed here, see the manual for that module.