Siemens SIMATIC TI555 - Preface

Preface
xi
TI545/TI555 System Manual
Preface
This SIMATIC

TI545

/TI555

System Manual includes requirements and
specifications for preparing your control site and installing a
SIMA TIC TI545/TI555 Programmable Logic Controller (PLC) system.
NOTE: This manual describes the SIMA TIC TI545-1 102 CPU, and both the
SIMA TIC TI555-1 101 and -1 102 CPUs. Information in this manual does not
apply to the SIMA TIC TI545-1 101 CPU. For the information concerning the
SIMA TIC TI545-1 101 CPU refer to SIMA TIC TI545 System Manual:
PPX:545-8101-x.
The following major topics are covered.
• Site preparation including power and grounding requirements and
other safety considerations.
• Hardware installation including Series 505  bases, power supplies,
TI545/TI555 CPUs, Remote Base Controllers (RBCs), and I/O modules.
• Upgrade of Series 500  bases for connection to the TI545/TI555.
• System cable and wiring procedures.
• Using EEPROMs or EPROMs.
• System startup, including modem operation.
• System troubleshooting, including use of AUX functions, status words,
and other diagnostic aids.
• General maintenance procedures such as changing power supply fuses.
About this Manual