Siemens SIMODRIVE 611-D Installation Guide

04.96 1 NC/Drive Machine Data
1.5 General bits
7 6 5 4 3 2 1 0
Bit No.
MD No.
5089
5090
bis
5139
5141
5142
5143
5144
5145
5146
5147
Secure
EPROM
cycles against
overwriting
Erase prot.
Do not erase
Acknowledge
frames
immediately
Pos. ackn. to
end frame
5148
5149
5150
5151
5152
5153
ZO and D No.
indep. of
progr. travel r.
Initial setting
after
NC Start
2)
Receiver location for execution from external
via computer link
Logical node receiver for execution from external
via computer link
Logical node receiver for execution from external
via computer link
Logical node receiver for execution from external
via computer link
Logical node receiver for execution from external
via computer link
Ethernet-address byte 5 (computer link)
Ethernet-address byte 4 (computer link)
Ethernet-address byte 6 (computer link)
Ethernet-address byte 3 (computer link)
MDs for later expansion. Do not change standard values
5th real axis (3rd transformation block)
Ethernet-address byte 1 (computer link)
Ethernet-address byte 2 (computer link)
File transfer
_______
2) SW 3 and higher
© Siemens AG 1992 All Rights Reserved 6FC5197- AA60
1–21
SINUMERIK 840C (IA)

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English