Siemens SIMOTION D45 Series - Nameplates

Description
1.6 Nameplates
D4x5
Manual, 03/2007 Edition
21
1.6 Nameplates
Side-mounted type plate
The following figure shows you all the information included in the type plate located on the
side of the unit.
0RGXOHGHVLJQDWLRQ
2UGHUQXPEHU
6HULDOQXPEHU
+:YHUVLRQ
Figure 1-4 Type plate
Note
You might need to access the information provided on the side-mounted type plate after the
D4x5 has been mounted. The type plate is located on the right side of the module housing,
which is the side typically used to connect to the SINAMICS S120 module. For this reason,
we recommend that you make a note of the serial number of the control unit prior to
assembly.
Note
The information contained in each field of the type plate on your actual control unit may differ
from the information presented in this Manual (for example, a later product version,
approvals and marks that have not yet been earned, etc., may be shown).