Siemens SIMOTION TM15 - Page 10

Description
1.1 TM15 and TM17 High Feature modules - Introduction
TM15 / TM17 High Feature Operating Manual
10 Commissioning Manual, 05/2009
● System configuration with integrated drives
In this configuration, the TM1x modules are connected directly
– To SIMOTION D4x5
– To SIMOTION D410 (not shown)
– To the CX32 expansion (not shown)
6,027,21'
6,1$0,&6
7070+LJK)HDWXUH0RGXOHV
'5,9(&/L4
'5,9(&/L4
3RZHU
Figure 1-1 Integration of TM15/TM17 High Feature with SIMOTION D4x5
● System configuration with external drives
In this configuration, the TM1x modules are connected to a SINAMICS S120 Control Unit
CU320 or CU310, which is connected
– To SIMOTION C, P or D (see figure) via PROFIBUS DP, or
– To SIMOTION P or D via PROFINET IO