Application tips
5.5 Other application examples
TM15 / TM17 High Feature Operating Manual
62 Commissioning Manual, 05/2009
5.5.2 Use of outputs
The following figure shows an example of an indicator lamp connection. Although the TM15
is shown, the TM17 High Feature can be wired in a similar manner. Please note that 24 VDC
is required on the "L1+" terminal for the output driver to operate. (See also "Supplementary
SINAMICS System Components for SIMOTION" Manual.)
9'&
P$PD[
;
5'<
',2
',2
',2
',2
',2
',2
',2
',2
70
/
0
Figure 5-5 Example: Output circuitry on the TM15
To Next Page
Loading...
Need help?
General
