Service and maintenance
7.3 Local/remote switch cover
SINAMICS G110D
200 Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Local/remote switch cover
Overview
The local/remote switch does not perform any safety function in accordance with the EU
Machinery Directive (98/37/EC).
The local/remote switch cover has been designed to enable the user to take control of the
Inverter and motor from the automated system. In the local mode, the user can precisely
control the movement of the motor, for example, starting, stopping and inching the motor
when fitting a new belt to a conveyor section.
The switch cover is an optional extra and can be ordered using the following order number:
6SL3555-0PL00-2AA0
The layout of the switch cover is shown in the figure below.
To Next Page
Loading...
