Siemens SINAMICS G110D - Backup data and storage

Commissioning
5.9 Backup data and storage
SINAMICS G110D
86 Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
5.9
Backup data and storage
5.9.1
Saving and transferring data using the IOP
The IOP as a medium to backup and transfer data
You can save a parameter set on the IOP and transfer it to other Inverters, for example, to
identically parameterize several Inverters or to transfer the settings after an Inverter has
been replaced.
Prerequisites for transferring data sets from the IOP to a different Inverter
The Inverter to which the parameter set is transferred must be of the same type and have
the same firmware release as the source Inverter.