Siemens SINAMICS G110D - Page 215

Appendix A
A.1 Electromagnetic compatibility
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
215
Table A- 1 Compliance Table
Model
Remarks
Category C1 - First Environment
-- The SINAMICS G110D inverters are not intended for use within the Cate-
gory C1 Environment.
Category C2 - First Environment - Professional Use
Filtered Variants
6SL3525-0PE**-*A*0
Drives FSA … FSB (400 V, 0.75 kW … 7.5 kW)
Class A: 15 m screened cable type CY
When used in the First (Domestic) Environment this product may cause
radio interference in which case mitigation measures may be required.
Category C3 - Second Environment
Unfiltered Variants
There are no unfiltered variants
Note
All drives should be installed and commissioned in accordance with the
manufacturer’s
guidelines and in accordance with good EMC practices.
For further information refer to SIEMENS application note "EMC Design Guidelines".