Functions
6.2 Inverter Control
SINAMICS G110D
96 Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Table 6- 2 Comparison of the methods for three-wire motor control
Three-wire control, method 1 (P0727 = 2)
1. Control command: Enable the motor so
that it can be switched on or switched off
2. Control command: Switch on the motor
CW rotation
3. Control command: Switch on motor
CCW rotation
Three-wire control, method 2 (P0727 = 3)
1. Control command: Enable the motor so
that it can be switched on or switched off
2. Control command: Switch the motor on
or off
3. Control command: Enter CW or CCW
rotation of the motor
A detailed description of all of the methods to control a motor can be found in the following
sections.
To Next Page
Loading...
