Backing up data and series commissioning
8.1 Saving settings on a memory card
Converter with control units CU250D-2
280 Operating Instructions, 04/2015, FW V4.7.3, A5E34261542B AB
Procedure with Startdrive
To safely remove the memory card, proceed as follows:
1. In the Drive Navigatorselect the following screen form:
2. Click on the button to safely remove the memory card.
Startdrive will tell you whether you can remove the memory card from the inverter.
You have now safely removed the memory card from the inverter.
To Next Page
Loading...
