Siemens SINAMICS G120D - 5 Commissioning; Commissioning Guidelines

Converter with control units CU250D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34261542B AB
59
Commissioning
5
5.1
Commissioning guidelines
The converter must match the motor and the drive application to be able to optimally operate
and protect the motor. We recommend a certain procedure when commissioning your
converter.
Explanation of the commissioning steps:
①
Preparing for commissioning
(Page 60)
②
Res
toring the factory setting
(Page 82)
③
Basic commissioning with
STARTER
(Page 69) orOperator
Panel (Page 65)
④
Adapt inputs and outputs
(Page 115)
⑤
Adapt fieldbus configuration
(Page 87)
⑥
Mo
tor control (Page 143)
⑦
Basic positioner and position co
ntrol
(Page 163)
⑧
Advanced commissioning
(Page 113)
⑨
Backing up data and series co
m-
missioning (Page 275)