Motor description
1.2 Technical features
1PH7 induction motors (Machine tools)
20 Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical feature Version
Shaft end to DIN 748–3 (IEC 60072–1) With keyway and feather key, plain shaft
(see Selection and ordering data)
SH 100 to 160 for belt
coupling and coupling
output:
Deep-groove ball bearings
Bearing version DE (standard)
SH 180 to 225
for coupling output:
for belt coupling or
increased radial forces:
Deep-groove ball bearings
Cylindrical-roller bearings
Radial eccentricity, concentricity, and axial
eccentricity acc. to DIN 42955, IEC 60072–1)
SH 100 to 160:
SH 180 to 225:
Tolerance level R (reduced)
Tolerance level N (normal)
Vibration severity acc. to IEC 60034–14 Level A is maintained up to the nominal limit
SH 100 to 160: Without paint finish,
Standard paint finish, anthracite RAL 7016
SH 180 to 225:
Primed,
Standard paint finish, anthracite RAL 7016
Paint finish
See "Options" table
Documentation supplied with the motors Operating instructions (German, English)
Options See "Options" table
S/R = Signals/Revolution
To Next Page
Loading...
