Siemens SINAMICS S120 - Page 273

Basic Information about the Drive System
Licensing
7-273
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
Note
If p9920[x] is changed to 0, all the indexes that follow are also set to 0.
After the license key has been entered, it has to be activated as follows:
5. p9921 = 1 Licensing, activate license key
The parameter is automatically reset to 0
In the table below, you can enter the characters in the license key and the associ-
ated decimal numbers.
Table 7-14 License key table
Letter /
number
Decimal
ASCII code
Table 7-15 Excerpt of ASCII code
Letter / number
Decimal Letter / number Decimal
- 45 I 73
0 48 J 74
1 49 K 75
2 50 L 76
3 51 M 77
4 52 N 78
5 53 O 79
6 54 P 80
7 55 Q 81
8 56 R 82
9 57 S 83
A 65 T 84
B 66 U 85
C 67 V 86
D 68 W 87
E 69 X 88
F 70 Y 89
G 71 Z 90
H 72