Siemens SINAMICS S120 - Changing the Offline Topology in STARTER

Preparations for Commissioning
Rules for wiring with DRIVE-CLiQ
2-39
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
2.3.4 Changing the offline topology in STARTER
The device topology can be changed in STARTER by moving the components in
the topology tree.
Table 2-8 Example: changing the DRIVE-CLiQ topology
Topology tree view Comments
Select the DRIVE-CLiQ
component.
Keeping the mouse button
depressed, drag the
component to the required
DRIVE-CLiQ interface and
release the mouse button.
You have changed the
topology in STARTER.
J