Siemens SINAMICS S120 - Commissioning PROFIBUS; General Information about Commissioning

Communication via PROFIBUS
Commissioning PROFIBUS
4-83
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
4.2 Commissioning PROFIBUS
4.2.1 General information about commissioning
Interfaces and diagnostic LEDs
A PROFIBUS interface with LEDs and address switches is available as standard
on the Control Unit.
PROFIBUS
interface
PROFIBUS
address switches
Control Unit
PROFIBUS
diagnostic LED “DP1”
Fig. 4-5 Interfaces and diagnostic LEDs
S PROFIBUS interface
The PROFIBUS interface is described in the following documentation:
References: /GH1/ SINAMICS S120 Equipment Manual
Control Units and Additional System Components
S PROFIBUS diagnostic LEDs
For a description of the diagnostic LEDs –> Subsection 6.1.1.