Siemens SINAMICS S120 - Measuring Sockets

Diagnosis
Diagnostics using STARTER
6-212
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
6.2.4 Measuring sockets
Description
The measuring sockets are used to output analog signals. Any interconnectable
signal can be output to any measuring socket on the Control Unit.
Caution
The measuring sockets should be used for commissioning and servicing purposes
only.
The measurements may only be carried out by properly trained specialist
personnel.
Measuring sockets j 2 mm
TO Meas. socket 0
T1 Meas. socket 1
T2 Meas. socket 2
M Reference
4.98 V
2.49 V
 0 % of
measuring signal
0 V
Measuring signal
(with default scale setting)
Fig. 6-10 Arrangement of the measuring sockets on the Control Unit 320