Communication via PROFIBUS
Commissioning PROFIBUS
4-85
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
Device master file
A device master file describes the features of a PROFIBUS slave clearly and com-
pletely. The device master files are ASCII files with an accurately defined format.
The following device master files (DMF) for SINAMICS S120 are available:
S si0280e5.gse English
S si0280e5.gsf French
S si0280e5.gsg German
S si0280e5.gsi Italian
S si0280e5.gss Spanish
The DMF files comply with the DMF guidelines in accordance with Revision 4,
thereby enabling clock-synchronous operation to be configured via a DMF.
At least STEP7 as of V5.1 SP3 is required for use in the SIMATIC environment.
The DMFs can be found at the following locations:
S On the Internet: http://www4.ad.siemens.de/WW/view/de/113204
S On the CD for the STARTER commissioning tool
Order no. 6SL3072-0AA00-0AGx
S On the CompactFlash card in directory
\\SIEMENS\SINAMICS\DATA\CFG\
Device identification
An identification parameter for individual slaves facilitates diagnosis and provides
an overview of the nodes on the PROFIBUS.
The information for each slave is stored in the following parameter:
r0964[0...6] Device identification
To Next Page
Loading...
