Siemens SINUMERIK 840D sl Manual

Connection of the Components
5.5 DRIVE-CLiQ Topologies
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
5-41
5.5.3 Connectable DRIVE-CLiQ components
Components
As a rule, all SINAMICS components approved for SINUMERIK can be connected using the
DRIVE-CLiQ interface.
Table 5-18 Components with DRIVE-CLiQ
Component Description
Active/Smart Line Module,
Booksize
Line Modules provide the central power supply to the DC link.
Single/Double Motor
Module, Booksize
Motor Modules draw their power from the DC link to supply the
connected motors.
SMC10/20/30 Cabinet-Mounted Sensor Modules are needed when a motor with a
DRIVE-CLiQ interface is not available and when external encoders
are required in addition to the motor encoder.
SME20/25 Measuring systems outside the cabinet can be connected directly to
the Sensor Module External.
NX10/15 Drive expansion module for up to 6 axes
Further reading
● You will find information about Line Modules and Motor Modules in the SINAMICS S120
Booksize Power Units Equipment Manual.
● You will find information about Sensor Modules in the SINAMICS S120 Control Units
Equipment Manual.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based