Siemens SINUMERIK 840D sl Manual

System overview
1.4 SINAMICS S120 components
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
1-5
Electronic nameplate in all components
All SINAMICS S120 components have an electronic nameplate. This nameplate contains all
relevant technical data for the corresponding component. In the motors, these are, for
example, the parameters of the electrical equivalent circuit diagram and characteristic values
of the installed motor encoder. This data is recorded automatically by the control unit via
DRIVE-CLiQ and does not have to be entered during the commissioning or after
replacement.
The electronic nameplate contains not only the technical data, but also logistical data, such
as the manufacturer identification, the order number and the worldwide unique identification
number. Because these values can be fetched electronically both on-site and by remote
diagnosis, a unique identification of all components used in a machine is always possible
with the consequent simplification of the servicing.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based