Siemens SINUMERIK 840D sl Manual

Preface
Guide for the SINUMERIK 840D sl machine configuring
iv Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Standard version
The accompanying documentation also mentions components that have not been released
for use with SINUMERIK 840D sl. The NC61 catalog is binding for the permitted
combinations.
Technical Support
If you have any questions, please contact our hotline:
Europe / Africa Asia / Australia America
Phone +49 180 5050 222 +86 1064 719 990 +1 423 262 2522
Fax +49 180 5050 223 +86 1064 747 474 +1 423 262 2289
Internet http://www.siemens.de/automation/support-request
E-mail mailto:adsupport@siemens.com
Note
Country-specific telephone numbers for technical support are provided under the following
Internet address:
http://www.siemens.com/automation/service&support
Questions about the Manual
If you have any queries (suggestions, corrections) in relation to this documentation, please
fax or e-mail us:
Fax: +49 (0) 9131 / 98 - 63315
E-mail: mailto:motioncontrol.docu@siemens.com
Fax form: See the reply form at the end of this publication
SINUMERIK Internet address
http://www.siemens.com/sinumerik
SINAMICS Internet address
http://www.siemens.com/sinamics

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based