Siemens SINUMERIK 840Di sl - 1 Fundamental Geometrical Principles; Description of Workpiece Points; Workpiece Coordinate Systems

Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
13
Fundamental Geometrical Principles
1
1.1 Description of workpiece points
1.1.1 Workpiece coordinate systems
In order for the machine or control to operate with the specified positions, these data must be
entered in a reference system that corresponds to the direction of motion of the axis slides. A
coordinate system with the axes X, Y and Z is used for this purpose.
Milling:
;
;
<
<
=
=
r
r
r
: