Siemens SINUMERIK 840Di sl - 5.6.2 Edit the settable work offset (G54...)

Frames
6.3 Programmable zero offset
Fundamentals
232 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
6.3 Programmable zero offset
6.3.1 Zero offset (TRANS, ATRANS)
Function
TRANS/ATRANS can be used to program translations for all path and positioning axes in the
direction of the specified axis. This allows you to work with different zero points, for example
when performing recurring machining processes at different workpiece positions.
Milling:
=
0
=
<
0
<
;
0
;
*
75$16