Motion commands
4.18 Tapping with compensating chuck (G63)
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
179
4.18 Tapping with compensating chuck (G63)
Function
You can use G63 to tap threads with compensating chuck. The following are programmed:
• Drilling depth in Cartesian coordinates
• Spindle speed and spindle direction
• Feed
The chuck compensates for any deviations occurring in the path.
;
=
Retraction movement
Also programmed with G63, but with the reverse direction of spindle rotation.
Programming
G63 X… Y… Z…
To Next Page
Loading...
