Siemens SINUMERIK 840Di sl - 5.1 Tool data

Motion commands
4.14 Contour definitions
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
159
4.14 Contour definitions
4.14.1 Straight line with angle (X2... ANG...)
Function
The end point is defined through specification of
• the angle ANG and
• one of the two coordinates X2 or Z2.
;=
;=
=
;
$1*
Programming
X2… ANG…
Parameters
X2 or Z2
End point in Cartesian coordinates X or Z
ANG
Angle
Machine manufacturer
The names for angle (ANG), radius (RND) and chamfer (CHR) can be set in MD, see
/FBFA/FB ISO Dialects.