Siemens SINUMERIK 840Di sl - List of Predefined Subprograms; Predefined Subroutine Calls

Tables
12.4 List of predefined subprograms
Fundamentals
494 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
WALCS4
5 WCS working area limitation group 4 active m
WALCS5 6 WCS working area limitation group 5 active m
WALCS6 7 WCS working area limitation group 6 active m
WALCS7 8 WCS working area limitation group 7 active m
WALCS8 9 WCS working area limitation group 8 active m
WALCS9 10 WCS working area limitation group 9 active m
WALCS10 11 WCS working area limitation group 10 active m
12.4 List of predefined subprograms
12.4.1 Predefined subroutine calls
List of predefined subroutines
The list of predefined subroutines contains all available subroutines grouped according to
function.
Some control functions are activated with subroutine call syntax.
1. Coordinate system
Keyword/
function
identifier
1st parameter 2nd parameter 3rd-15th
parameter
4th-16th
parameter
Explanation
PRESETON AXIS*:
Axis identifier
Machine axis
REAL:
Preset offset
G700/G7100
context
3.-15.
Parameter as
1 ...
4.-16.
parameter
as 2 ...
Sets the actual value for programmed
axes.
One axis identifier is programmed at a
time, with its respective value in the
next parameter.
PRESETON can be used to program
preset offsets for up to 8 axes.
DRFOF Deletes the DRF offset for all axes
assigned to the channel.
*) As a general rule, geometry or special axis identifiers can also be used instead of the
machine axis identifier, as long as the reference is unambiguous.