Tool offsets
8.7 Activating the active tool offset immediately
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
343
Relative D no. structure With internal reference made to the associated tools
(e.g., tool management and monitoring function)
Without integrated tool management (external to NC)
Flat D no. structure Without internal reference made to the associated tools
Selection
• With integrated tool management (inside NC)
relative D no. structure with internal reference to the associated tools
(e.g., replacement tool management and monitoring function possible)
• Without integrated tool management (outside NC)
flat D no. structure without internal reference to associated tools
Machine manufacturer
Tool management: See machine manufacturer's specifications.
8.7 Activating the active tool offset immediately
Function
MD $MM_ACTIVATE_SEL_USER_DATA can be used to define that the active tool offset
can be activated immediately if the parts program is in "stop" mode. See
/FB1/Function Manual Basic Functions; Axes, Coordinate Systems, Frames (K2)
Danger
The offset is applied the next time the parts program is started.
8.8 Tool radius compensation (G40, G41, G42)
Function
When tool radius compensation is active, the control automatically calculates the equidistant
tool paths for different tools.
To Next Page
Loading...
