Frames
6.4 Programmable rotation (ROT, AROT, RPL)
Fundamentals
250 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
=
=
;
;
<
<
*
*
Requirement:
The tool must be positioned perpendicular to the working plane. The positive direction of the
infeed axis points in the direction of the toolholder. Specifying CUT2DF activates the tool
radius compensation in the rotated plane. For more information please refer to Section
"2D Tool Compensation, CUT2D CUT2DF".
To Next Page
Loading...
