Tool offsets
8.12 Collision monitoring (CDON, CDOF, CDOF2)
Fundamentals
384 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Bottleneck detection
3URJUDPPHGFRQWRXU
7RROSDWK
Since the tool radius selected is too wide to machine this inside contour, the "bottleneck" is
bypassed.
An alarm is output.
Contour path shorter than tool radius
3URJUDPPHGFRQWRXU
7RROSDWK
The tool travels round the workpiece corner on a transition circle and then continues to
follow the programmed contour exactly.
To Next Page
Loading...
