Tables
12.1 List of statements
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
451
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
GET
Assign machine axis/axes Axis must be
released in the
other channel
with RELEASE.
GETD Assign machine axis/axes directly See GET.
GETACTT Get active tool from a group of tools with
the same name.
GETSELT Get selected T number.
GETT50 Get T number for tool name
GOTO Jump statement first forward then
backward (direction initially to end of
program and then to start of program)
GOTO (label, block no.)
Labels must exist in the
subprogram.
GOTOF Jump forwards (toward the end of the
program)
GOTOF (Label, block
no.)
GOTOB Jump backwards (toward the start of the
program)
Can be applied
in part program
and technology
cycles.
GOTOB (Label, block
no.)
GOTOC Suppress alarm 14080 "Destination not
found".
See GOTO.
GWPSOF Deselect constant grinding wheel
peripheral speed (GWPS).
GWPSOF(T No.) s
GWPSON Select constant grinding wheel peripheral
speed (GWPS)
GWPSON(T No.) s
H... Auxiliary function output to
the PLC
Real/INT
progr.:
REAL:
0 ...+/- 3.4028
exp38
INT:
-2147483646
...
+2147483647
Display:
±
999,999,999.9
999
Can be
set for each MD
(machine
manufacturer).
H100 or H2=100
I
4
Interpolation parameters Real s
I1 Intermediate point
coordinate
Real s
IC Incremental dimensioning 0, ...,
±99999.999°
X=IC(10) s
ICYCOF All blocks of a technology cycle are
processed in one IPO cycle following
ICYCOF.
Within the
program level
only.
ICYCON Each block of a technology cycle is
processed in a separate IPO cycle
following ICYCON.
Within the
program level
only.
IDS Identification of static synchronized actions
To Next Page
Loading...
