Siemens SINUMERIK 840Di sl - Page 508

Tables
12.4 List of predefined subprograms
Fundamentals
508 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
COUPRES
#
AXIS:
Followin
g axis or
following
spindle
(FS)
AXIS:
Leadin
g axis
or
leading
spindle
(LS)
Couple reset:
Reset
synchronous
spindle group.
The pro-
grammed values
become invalid.
The machine
data values are
valid.
For synchronous spindles, the axis parameters are programmed with SPI(1) or S1.
26. Structure statements in the STEP editor (editor-based program support)
1st parameter 2nd parameter 3rd parameter Explanation
SEFORM STRING[128]:
section name
INT: level STRING[128]:
icon
Current section name for STEP
editor
#) The keyword is not valid for SINUMERIK 810 D.
Keyword/su
broutine
identifier
1st
parameter
2nd
parameter
3rd
parameter
4th
parameter
Explanation
COUPON # AXIS:
Following
axis
AXIS:
Master axis
REAL:
Activation
position of
following
axis
Couple on:
Activate ELG group/synchronous spindle pair. If
no activation positions are specified, the couple is
activated as quickly as possible (ramp). If an
activation position is specified for the following
axis and spindle, this refers absolutely or
incrementally to the master axis or spindle.
Parameters 4 and 5 only have to be programmed
if the 3rd parameter is specified.
COUPOF # AXIS:
Following
axis
AXIS:
Master axis
REAL:
Deactivation
position of
following
axis
(absolute)
REAL:
Deactivation
position of
master axis
(absolute)
Couple OFF:
Deactivate ELG group/synchronous spindle pair.
The couple parameters are retained. If positions
are specified, the couple is only canceled when all
the specified positions have been overtraveled.
The following spindle continues to revolve at the
last speed programmed before deactivation of the
couple.